TM 9-2320-366-20-3
10-6. SPINDLE REPLACEMENT (CONT)
NOTE
Step (13) applies to intermediate and rear
spindles only.
(13) Connect air hose (17) to 45-degree fitting (11).
d. Follow-On Maintenance
(1) Install front brake air chamber (for front spindles
only) (para 11-7).
(2) Install rear brake air chambers (for intermediate and
rear spindles only) (para 11-8).
(3) Install front brake shoes (for front spindles only) (para
11-2).
(4) Install rear brake shoes (for intermediate and rear spindles
only) (para 11-3).
(5) Install wheel bearing/CTIS seal (para 10-2).
(6) Install differential spider assembly (para 10-3).
(7) Refill hub assembly (for front spindles only)
(8) Install wheel and tire (TM 9-2320-366-10-2).
(9) Lower cab (TM 9-2320-366-10-1).
(10) Start engine (TM 9-2320-366-10-1).
(11) Operate vehicle, checking for proper steering operation
and excessive vibration (TM 9-2320-366-10-1).
(12) Shut down engine (TM 9-2320-366-10-1).
(13) Check for oil leaks around wheel end assembly.
End of Task.
Change 2
