TM 9-2320-366-20-3
10-6. SPINDLE REPLACEMENT (CONT)
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in a
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap
and water. Failure to comply may result in
injury to personnel.
NOTE
Steps (4) through (6) apply to front spindles
only.
(4) Apply antiseize compound to threads of three
fittings (8, 9, and 10).
(5) Install fittings (9 and 10) to spindle (5).
(6) Install fitting (8) on fitting (10).
NOTE
Steps (7) and (8) apply to intermediate and
rear spindles only.
(7) Apply antiseize compound to threads of 45-degree
fitting (11).
(8) Install 45 degree fitting (11) in spindle (5).
10-28
Change 2
