TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Rear tire removed (TM 9-2320-366-10-2).
(Item 20, Appendix D)
Rear spring brakes caged (para 11-6).
Sealing Compound (Item 58, Appendix D)
Nut, Plain, Round (Item 127.1, Appendix G)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Pipe (Item 56, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
NOTE
Intermediate axle and rear axle brake air
chambers are removed/installed the same
way. Intermediate axle brake air chambers
shown.
a. Removal.
NOTE
Tag air hoses and connection points prior to
removal.
(1) Disconnect six air hoses (1) from tee fittings (2, 3, and
4).
Change 1
