TM 9-2320-366-20-4
This task covers:
a. Removal
d. Adjustment
b. Inspection
e. Follow-On Maintenance
c. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Rag, Wiping (Item 50, Appendix D)
Tire removed (TM 9-2320-366-10-2).
Grease, Automotive and Artillery (GAA) (Item
Brakes caged (para 11-6).
22, Appendix D)
Lockwasher (2) (Item 107, Appendix G)
Tools and Special Tools
Trestle, Motor Vehicle Maintenance (Item 47, Appendix
Personnel Required
(2)
Tool Kit, Genl Mech (Item 46, Appendix C)
Tool, Spring Removal (Item 85, Appendix B)
Respirator, Air Filter (Item 29, Appendix C)
Adjusting Tool, Brake Shoe (Item 2, Appendix C)
Brake Adjusting Tool Support (Item E-2, Appendix E)
a. Removal.
WARNING
Wheel drum weighs approximately 90 lbs (41
kg). Use the aid of an assistant to help
remove wheel drum. Failure to comply may
result in injury to personnel.
Brake shoes may be covered with dust.
Breathing this dust may be harmful to your
health. Do not use compressed air to clean
brake shoes. Wear a filter mask approved
for use against brake dust.
Failure to
comply may result in injury to personnel.
NOTE
Left and right rear brake shoes are removed
the same way. Left side shown.
(1) Remove wheel drum (1) from wheel hub (2).
Change 1
