TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Antiseize Compound (Item 58, Appendix D)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Ties, Cable, Plastic (Item 69, Appendix D)
Wrench, Pipe (Item 56, Appendix C)
Nut, Plain, Round (Item 127.1, Appendix G)
Trestle, Motor Vehicle Maintenance (Item 47, Appendix
Personnel Required
Goggles, Industrial (Item 15, Appendix C)
(2)
Respirator, Air Filter (Item 29, Appendix C)
a. Removal.
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
CAUTION
Use caution not to pinch left side air hoses
when positioning trestles. Failure to comply
may result in damage to equipment.
NOTE
Left and right front brake air chambers are
removed the same way. Left side shown.
(1) Position front of vehicle on trestle so tire is off ground.
(2) Remove left front tire from vehicle (TM 9-2320-366-10-2).
Change 1
