TM 9-2320-211-20
NOTE
and
2-84. A c c e l e r a t o r
Linkage--Diesel
Do not remove the rod assembly at the
Multifuel
adjusting nut since this will change the fuel
a. Removal.
injector setting.
(1) Remove the hand throttle as described in
(5) Remove the washer securing the pedal rod
to the linkage bracket. Remove the rod.
(2) Remove the spring from the throttle rod
(6) Remove the two nuts and screws securing
assembly.
the throttle linkage bracket to the floorboard.
(3) Remove the pin and cotter key attaching
(7) Remove the two nuts and screws securing
the linkage to the fuel rack lever.
the pedal and pedal bracket to the floorboard, and
(4) Remove the nut and bolt securing the rod
remove the pedal.
asembly to the bracket.
