Figure 2-97. Secondary fuel filter--diesel models

TM 9-2320-211-20

2-89. Manifold Heater Injector Nozzle, Spark

Plug, and Spark Plug Housing--Diesel

Models

a. Removal.

(1) Disconnect the igniter wire from the spark

plug, and remove the plug with the gasket from the

Figure 2-97. Secondary fuel filter--diesel models.

(c) Remove the cover from the housing:

discard the cover gasket.

(d) Lift the element out of the housing

(2) Disconnect the two fuel lines from the

Discard the element (fig. 2-98).

injector nozzle. Remove the injector nozzle from the

Figure 2-98. Removing or installing element from

fuel filter housing--diesel models.

Figure 2-100. Injector nozzle.

(2) I n s t a l l a t i o n .

(3) Remove the four bolts and lockwashers

(a) Place a new element into the housing

securing the housing to the intake elbow. Separate

the oil line and clamp from the housing. Remove

(b) Position a new gasket and the cover on

the housing and gasket (fig. 2-101).

(c) Connect the fuel line to the elbow on the

cover (fig. 2-97), and close the drain cock.