C3, TM 9-2320-211-20
(3) Remove the nut and lockwasher securing the
emergency shutoff control to the instrument panel. Pull
from instrument panel--dieseil only.
b. Installation.
b. Installation.
(1) Position the emergency shutoff control on the
instrument panel. Secure the control to the panel with a
(2) Position the control on the instrument panel,
lockwasher and nut.
and secure it to the panel with a Iockwasher and nut (fig.
(2) String the control cable through the cowl
2-80).
opening, and secure it to the clamp with a bolt and nut.
(3) String the control cable wire through the cowl
(3) Position the collar and control cable wire end to
opening to the fuel rack lever. Secure the wire to the lever
the fuel rack lever. Tighten the setscrew securing the wire
to the collar.
2-80. Emergency Fuel Shutoff Control-Diesel
2-81. Fuel
Shutoff Control-Multifuel Models (Fig.
Models.
2-84).
a. Removal.
a. Removal
(1) Loosen the setscrew securing the control wire to
(1) Remove the retaining nut and lockwasher
securing the shutoff control to the instrument panel.
(2) Remove the cotter pin from the pin securing the
fuel shutoff control to the fuel shutoff valve. Remove the
castellated nut, washer, and screw, and remove the
control wire.
b. Insullation.
(1) Position the control to the instrument panel, and
secure it with a lockwasher and nut.
(2) Secure the control wire with a washer, screw,
and nut. Install the shutoff control to the shutoff valve
with the pin and cotter pin.
wire--diesel only.
(2) Unscrew the nut and remove the bolt securing
the emergency control cable to the clamp. Pull the cable
multifuel only.