Manifold Heater Ignition Unit

TM 9-2320-211-20

Figure 2-107. Removing ignition unit.

2-96. Manifold Heater Ignition Unit

(Coil)--Diesel

Models

a. Removal.

Figure 2-109. Removing coil from mounting plate.

(1) Disconnect the electrical leads from the

b. Installation.

top and bottom of the coil unit (fig. 2-108).

(1) Secure the coil to the mounting plate with

t w o lockwashers and bolts (fig. 2-109).

(2) Connect the electrical leads at the top and

b o t t o m of the coil unit (fig. 2-108).

2-97. M a n i f o l d

Heater

Fuel--Multifuel

Models

a. Removal.

(1) Disconnect the heater fuel filter inlet and

o u t l e t lines (fig. 2-110).

(2) Remove the screws and lockwashers

s e c u r i n g the filter to the bracket (fig. 2-111).

( 3 ) Remove the ground wire and fuel filter.

Figure 2-108. Disconnecting electrical leads from coil.

(2) R e m o v e t h e t w o b o l t s a n d l o c k w a s h e r s

securing the coil unit to the mounting plate (fig. 2-

1 0 9 ) . Remove coil.

Figure 2-110. Disconnecting manifold heater fuel filter lines.