TM 9-2320-211-20
harness for intake manifold heater components at
b. Installation.
the ground lead terminal and five connecting
(1) Secure the flame heater housing intake
points.
manifold with lockwashers and bolts.
b. Installation. Connect the branched wiring
(2) Screw the injector nozzle into the flame
harness for the intake manifold heater components
h e a t e r b o d y , and connect the fuel lines to the
at the five connecting points and the ground lead
nozzle.
terminal.
(3) Install the spark plug housing to the flame
heater body.
2-92. Manifold Heater Wiring Harness--
(4) Screw the spark plug into the housing, and
Multifuel Models
connect the ignition lead to the plug.
(Fig. 103.)
2-91. Manifold Heater Wiring Harness--Diesel
Models
a. Removal. Disconnect the branched wiring
