TM 9-2320-272-24-2
FOLLOW-ON TASKS: Install transmission-to-transfer case propeller shaft (para. 3-148).
Install transmission PTC-to-hydraulic pump propeller shaft, if equipped
Install upper radiator hose and bracket (para. 3-58).
Install hood assembly (para. 3-275).
Fill steering system to proper oil level (LO 9-2320-272-12).
Fill engine to proper oil level (para. 3-5).
Fill transmission to proper oil level (para. 3-133).
Close air reservoirs drainvalve (TM 9-2320-272-10).
Connect battery ground cables (para. 3-126).
Adjust modulator cable (para. 3-145).
Adjust accelerator linkage (para. 3-42).
Fill coolant system to proper coolant level (para 3-53).
CAUTION
Never start a new or repaired engine without
performing run-in starting procedures (para. 4-7).
Perform engine run-in starting procedures (para. 4-8).
Start engine (TM 9-2320-272-10), allow air pressure to build up to normal
operating range, and check for leaks. Road test vehicle.
4-85
