TM 9-2320-272-24-2
NOTE
Wrap all male pipe threads with antiseize tape before installation.
Connect air line (10) on air compressor (1).
44.
Install air line (10) on engine (3) with clamp (5), washer (6), and screw (7).
45.
Install power steering inlet (4) and outlet (9) lines on power steering pump (2) and tighten clamp (8).
46.
Install emergency stop cable (36) on screw (35) with sleeve (34) and screw (33).
47.
Install emergency stop cable (36) on fuel pump bracket (32) with washer (41) and new cotter pin (40).
48.
Install emergency stop cable (36) on fuel pump bracket (38) with clamp (37) and screw (39).
49.
Install screw (19) on modulator cable (18) with washer (22) and nut (23).
50.
Install modulator cable (18) and screw (19) on throttle control lever (12) with washer (17) and new
51.
cotter pin (16).
Install surge tank and bracket (para. 3-62).
52.
Install radiator (para. 3-60).
53.
Pull sleeve (25) away from socket (26) and install accelerator linkage (24) on throttle control lever (12).
54.
Install modulator cable (18) on bracket (13) with two shims (15), U-bolt (20), and new locknuts (14).
55.
Install spring (21) on modulator cable (18) and bracket (13).
56.
Install fuel return line (29) on fuel pump (11) and tighten clamp (30).
57.
Install fuel return line (29) and bracket (28) on gearcase housing (31) with screw (27).
58.
4-82
