TM 9-2320-272-24-2
3-275. ENGINE HOOD MAINTENANCE
THIS TASK COVERS:
a. Removal
c. Adjustment
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Torque wrench (Appendix E, Item 144)
Parking brake set (TM 9-2320-272-10).
Hood raised and secured (TM 9-2320-272-10).
MATERIALS/PARTS
Left and right splash shields removed
Two locknuts (Appendix D. Item 291)
(TM 9-2320-272-10).
GENERAL SAFETY INSTRUCTIONS
Locknut (Appendix D, Item 294)
Lockwasher (Appendix D, Item 372)
All personnel must stand clear during lifting
operations.
1.
Remove two locknuts (3), washers (6), screws (5), washers (6), and hood stop cables (4) from radiator
support brackets (7). Discard locknuts (3).
2.
Disconnect wiring harness quick-disconnect (2) from harness plug (1).
3.
Remove locknut (8), washer (9), screw (12), washer (9), ground strap (11), and lockwasher (10) from
inside left fender (13). Discard locknut (8) and lockwasher (10).
3-742