TM 9-2320-272-24-2
3-334. TRANSMISSION PTO-TO-HYDRAULIC PUMP PROPELLER SHAFT REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M925/A1/A2, M928/A1/A2, M929/A1/A2,
TM 9-2320-272-10
M930/A1/A2, M932/A1/A2, M936/A1/A2
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic' tool kit (Appendix E, Item 1)
s
Parking brake set (TM 9-2320-272-10).
a. Removal
Remove setscrews (5) and (9) and propeller shaft (4) from PTO shaft (2) and hydraulic pump shaft (8).
b. Installation
1.
Position universal joint ends (3) of propeller shaft (4) over PTO shaft (2) and hydraulic pump
shaft (8). Ensure universal joint ends (3) are seated properly over woodruff keys (6) of PTO
shaft (2) and hydraulic pump shaft (8).
2.
Install propeller shaft (4) on PTO shaft (2) and hydraulic pump shaft (8) with setscrews (5) and (9).
Ensure setscrews (5) and (9) seat properly in shaft channels (1) and (7).
FOLLOW-ON TASK: Start engine (TM 9-2320-272-10) and operate any accessory driven by the
transmission PTO-to-hydraulic pump propeller shaft. Stop engine (TM 9-2320-272-10)
and check shaft for looseness.
3-853