TM 9-2320-272-24-2
NOTE
Perform step 4 for late model engines.
4.
Install breather tube (8) on breather (7) and elbow (10) and tighten two hose clamps (9).
5.
Install flywheel housing (12) on rear trunnion mount (13) with two washers (15), lockwashers (14),
and screws (11).
6.
Install trunnion cap (18) on front trunnion mount (17) and engine (6) with two lockwashers (19) and
screws (16).
7.
Install upper container section (1) on lower container section (5) with forty-two screws (4),
lockwashers (3), and nuts (2). Tighten nuts (2) 85-105 lb-ft (115-142 Nm).
4-90