TM 9-2320-272-24-+2
THIS TASK COVERS:
b. Installation
a Removal
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-24P
All
GENERAL SAFETY INSTRUCTIONS
TOOLS
All personnel must stand clear during lifting
General mechanic's tool kit (Appendix E, Item 1)
operations.
Lifting device
Engine container pressure must be released before
Utility chain
opening container.
MATERIALS/PARTS
Forty-two lockwashers (Appendix D, Item 392)
Four lockwashers (Appendix D, Item 377)
WARNING
Engine container is pressurized. Ensure pressure is released
before opening container. Failure to do so may cause injury or
death to personnel.
1.
Remove forty-two nuts (2), lockwashers (3), screws (4), and upper container section (1) from lower
container section (5). Discard lockwashers (3).
2.
Remove two screws (11), lockwashers (14), and trunnion cap (13) from front trunnion mount (12)
and engine (6). Discard lockwashers (14).
3.
Remove two screws (15), lockwashers (17), and washers (19) from rear trunnion mount (18) and
flywheel housing (16). Discard lockwashers (17).
NOTE
Perform step 4 for late model engines.
4.
Loosen two hose clamps (9) and remove breather tube (8) from breather (7) and elbow (10).
4-86
