TM 9-2320-366-20-5
20-43. 200 AMP ALTERNATOR KIT INSTALLATION (CONT)
CAUTION
Position both terminal blocks loosely on
mounting bracket and align correctly before
tightening nuts. Failure to comply may result
in damage to equipment.
(43) Position identification plate (58) and two terminal blocks
(59) on bracket (60) with eight screws (61), washers
(62), and self-locking nuts (63).
(44) Tighten eight self-locking nuts (63) to 48 lb-in. (5 Nm).
NOTE
Terminal blocks are not centered on
bracket. Position bracket on spare tire
retainer with exposed edge of ident-
ification plate toward cab.
Step (45) requires the aid of an assistant.
(45) Position bracket (60) on spare tire retainer (64) with four
washers (65) and screws (66).
(46) Tighten four screws (66) to 48 lb-in. (5 Nm).
