TM 9-2320-366-20-5
This task covers:
a. Installation
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
100 amp alternator removed (para 7-2).
Ties, Cable, Plastic (Item 69, Appendix D)
100 amp reverse polarity relay removed (para 7-30).
Nut, Self-Locking (Item 153, Appendix G)
Nut, Self-Locking (M1093/M1094) (2) (Item
156, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Nut, Self-Locking (3) (Item 168, Appendix G)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Washer, Spring (M1093/M1094) (2) (Item 293,
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 36, Appendix C)
Lockwasher (2) (Item 92, Appendix G)
Caps, Vise Jaw (Item 4, Appendix C)
Vise, Machinist (Item 48, Appendix C)
Personnel Required
(2)
a. Installation.
NOTE
Retain belt
adjusting
arm
for
future
installation.
(1) Remove two screws (1), lockwashers (2), and belt
adjusting arm (3) from alternator bracket (4). Discard
lockwashers.
(2) Position belt adjusting arm (5) on alternator bracket (4)
with two lockwashers (2) and screws (1).
(3) Tighten two screws (1) to 25-32 lb-ft (35-43 Nm).
20-227
