TM 9-2320-366-20-5
WARNING
200 amp alternator weighs approximately
72 lbs (33 kgs). The aid of an assistant is
required to install 200 amp alternator.
Failure to comply may result in injury to
personnel.
NOTE
Step (12) requires the aid of an assistant.
(12) Position alternator (16) on alternator bracket (4) with
washer (18), screw (19), and self-locking nut (20).
(13) Position washer (21), screw (22), washer (23), and self-
locking nut (24) on alternator (16).
(14) Tighten self-locking nut (20) to 45-55 lb-ft (61-75 Nm).
(14.1) Tighten self-locking nut (24) to 25-32 lb-ft (35-43 Nm).
(15) Remove self-locking nut (25) and washer (26) from
voltage regulator terminal (27).
(16) Position terminal lug TL110 (28) on voltage regulator
terminal (27) with washer (26) and self-locking nut (25).
(17) Tighten self-locking nut (25) to 24 lb-in. (3 Nm).
(18) Position dust boot (29) on terminal lug TL110 (28).
20-229
Change 1
