TM 9-2320-366-20-5
(32) Remove nut (49), lockwasher (50), and washer (51) from
(33) Position terminal lug TL60 (43) on alternator terminal
(52) with washer (51), lockwasher (50), and nut (49).
(34) Tighten nut (49) to 156-180 lb-in. (17-21 Nm).
(35) Position dust boot (44) on terminal lug TL60 (43).
(36) Remove nut (53), lockwasher (54), insulation washer
(55), and fuse link (56) from alternator terminal (57).
(37) Position fuse link (56), terminal lugs TL2 (42) and TL6
(48), insulation washer (55), lockwasher (54), and nut
(38) Tighten nut (53) to 156-180 lb-in. (17-21 Nm).
(39) Position dust boot (45) on terminal lugs TL2 (42) and
TL6 (48).
(40) Position three clamps (10) on 12 vdc cable (40) and 24
vdc cable (41).
(41) Position three clamps (10) on air inlet manifold (13) three
with washers (9) and screws (8).
(42) Tighten three screws (8) to 22-27 lb-ft (31-37 Nm).
Change 1
20-231