TM 9-2320-366-20-5
REPLACEMENT/REPAIR/ADJUSTMENT
This task covers:
a.Removal
d. Assembly
b.Disassembly
e. Installation
c. Cleaning/Inspection
f. Adjustment
INITIAL SETUP
Tools and Special Tools
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Tool Kit, Genl Mech (Item 46, Appendix C)
Air tanks drained (TM 9-2320-366-10-1).
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix
STE/ICE-R (Item 41, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape (Item
M1089 30K Winch Test Adapter (Item 7, Appendix
20, Appendix D)
Nut, Self-Locking (2) (Item 134, Appendix G)
Apron, Rubber (Item 3, Appendix C)
Sealing Compound (Item 58.1, Appendix D)
Gloves, Rubber (Item 13, Appendix C)
Rag, Wiping (Item 50, Appendix D)
Goggles, Industrial (Item 15, Appendix C)
Solvent, Dry Cleaning (Item 65, Appendix D)
a. Removal.
NOTE
LH and RH 30K winch tensioner pneumatic
valve assemblies are removed the same way.
LH M1089 30K winch tensioner pneumatic
valve assembly shown.
Tag hoses and connection points prior to
disconnecting.
(1) Disconnect hose (1) from fitting (2).
(2) Disconnect hoses (3 and 4) from two 90-degree
fittings (5).
Change 2
