TM 9-2320-366-20-5
17-30. M1089 30K WINCH TENSIONER PNEUMATIC VALVE ASSEMBLY
REPLACEMENT/REPAIR/ADJUSTMENT (CONT)
e. Installation.
NOTE
LH and RH M1089 30K winch tensioner
pneumatic valve assemblies are installed the
same way. LH M1089 30K winch tensioner
pneumatic valve assembly shown.
(1) Position M1089 30K winch tensioner pneumatic valve
assembly (1) on 30K winch frame (2) with two washers
(3), screws (4), and self-locking nuts (5).
(2) Tighten two self-locking nuts (5) to 96-120 lb-in. (11-14
Nm).
(3) Position hoses (6 and 7) on two 90-degree fittings (8).
(4) Position hose (9) on fitting (10).
(5) Tighten hoses (6, 7, and 9) to 132-144 lb-in. (15-16
Nm).
f. Adjustment.
NOTE
LH and RH M1089 30K winch tensioner
pneumatic valve assemblies are adjusted the
same way. LH M1089 30K winch tensioner
pneumatic valve assembly shown.
(1) Disconnect hose (1) from 90-degree fitting (2).
(2) Pull out and turn knob (3) on regulating valve (4) fully
counterclockwise.
Change 1
