TM 9-2320-366-20-5
d. Assembly.
(1) Install two solenoid valves (1) on M1089 30K winch
pneumatic manifold (2) with four captive screws (3).
(2) Install two solenoid valves (4) on M1089 30K winch
pneumatic manifold (2) with four captive screws (5).
(3) Apply antiseizing tape to threads of eight plugs (6) and
plug (7).
(4) Install eight plugs (6) in M1089 30K winch pneumatic
manifold (2).
(5) Install plug (7) in M1089 30K winch pneumatic manifold
(2) with mounting bracket (8).
(6) Install two screws (9) in mounting bracket (8).
CAUTION
Cathode side (side with band) of rectifier
must be attached to positive electrical lead
(yellow). Failure to comply may result in
damage to equipment.
NOTE
Rectifier should be attached as close to
solenoid as possible.
(7) Solder four rectifiers (10) to pairs of wires (11).
(8) Position insulation sleeving (12) over four rectifiers (10).
(9) Shrink sleeving (12) on four rectifiers (10).
Change 1
17-141
