TM 9-2320-366-20-5
17-25. WINCH CONTROL VALVE ASSEMBLY AND BRACKET REPLACEMENT (CONT)
c. Removal (M1090/M1094).
NOTE
Remove plastic cable ties as required.
Tag connectors and connection points prior to
disconnecting.
(1) Loosen two captive screws (1) and disconnect
connectors L4 (2) and L5 (3) from winch control valve
(4).
CAUTION
Cap or plug hoses and connection points to
prevent contamination of hydraulic system.
Failure to comply may result in damage to
equipment.
NOTE
Tag hoses and connection points prior to
disconnecting.
(2) Disconnect four hoses (5) from winch control valve (4).
(3) Disconnect two hoses (6) from winch control valve (4).
17-118
