TM 9-2320-366-20-5
(10) Start engine (TM 9-2320-366-10-1).
(11) Engage PTO (TM 9-2320-366-10-2).
(12) Push and hold winch switch (TM 9-2320-366-10-2).
NOTE
After one complete layer of 15K SRW cable
is on drum, provide tension on 15K SRW
cable by physically pulling on 15K SRW
cable so that 15K SRW cable spools on
tightly. Leave enough 15K SRW cable
unspooled to allow installation of hook block.
Step (13) requires the aid of two assistants.
(13) Reel 15K SRW cable (1) onto drum (9) (TM 9-
2320-366-10-2).
e. Follow-On Maintenance.
(1) Disengage PTO (TM 9-2320-366-10-2).
(2) Shut down engine (TM 9-2320-366-10-1).
(3) Lubricate 15K SRW cable (Appendix H).
End of Task.
Change 2
17-113
