TM 9-2320-366-20-5
This task covers:
a. Removal (All Models Except M1090/M1094)
d. Installation (M1090/M1094)
b. Installation (All Models Except M1090/M1094)
e. Follow-On Maintenance
c. Removal (M1090/M1094)
INITIAL SETUP
Equipment Conditions
Materials/Parts
Dump body raised to maintenance position
Dispenser, Pressure Sensitive Adhesive Tape
(M1090/M1094) (TM 9-2320-366-10-1).
(Item 20, Appendix D)
Engine shut down (TM 9-2320-366-10-1).
Cap and Plug Set (Item 14, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Oil, Lubricating, OE/HDO 10 (Item 42, Appendix
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Pan, Drain (Item 24, Appendix C)
Rag, Wiping (Item 50, Appendix D)
Tool Kit, Genl Mech (Item 46, Appendix C)
Packing, Preformed (5) (Item 179, Appendix G)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal (All Models Except M1090/M1094).
CAUTION
Cap or plug hoses and connection points to
prevent contamination of hydraulic system.
Failure to comply may result in damage to
equipment.
NOTE
Remove plastic cable ties as required.
Tag hoses and connection points prior to
disconnecting.
(1) Disconnect five hoses (1) from winch control valve (2).
