TM 9-2320-366-20-5
(5) Position winch control valve (3) on right frame rail (7)
with three washers (8), screws (9), and nuts (10).
(6) Position washer (11) and terminal lug TL320 (12) on
winch control valve (3) with washer (13) screw (14), and
nut (15).
(7) Tighten three nuts (10) and nut (15) to 20-24 lb-ft (27-33
Nm).
NOTE
Install plastic cable ties as required.
(8) Connect connectors L5 (16) and L4 (17) to winch control
valve (3).
(9) Tighten two captive screws (18) in connectors L5 (16)
and L4 (17).
(10) Install five hoses (19) on winch control valve (3).
17-117
