TM 9-2320-366-20-5
(4) Remove four nuts (7), washers (8), screws (9), and
winch control valve (4) from bracket (10).
(5) Remove four screws (11) and two brackets (12) from
winch control valve (4).
NOTE
Note position and orientation of fittings prior
to removal.
(6) Remove tee fitting (13), pipe nipple (14), and pipe
coupling (15) from fitting (16).
(7) Remove fitting (16) and four fittings (17) from winch
control valve (4).
(8) Remove five preformed packings (18) from fitting (16)
and four fittings (17). Discard preformed packings.
17-119
