TM 9-2320-366-20-5
17-25. WINCH CONTROL VALVE ASSEMBLY AND BRACKET REPLACEMENT (CONT)
d. Installation (M1090/M1094).
(1) Install five preformed packings (1) on four fittings (2) and
fitting (3).
(2) Install four fittings (2) and fitting (3) in winch control valve
(4).
(3) Install pipe coupling (5) on fitting (3).
(4) Install pipe nipple (6) in pipe coupling (5).
(5) Install tee fitting (7) on pipe nipple (6).
(6) Position two brackets (8) on winch control valve (4) with
four screws (9).
(7) Tighten four screws (9) to 11-13 lb-ft (15-17 Nm).
(8) Position winch control valve (4) on bracket (10) with four
screws (11), washers (12) and nuts (13).
(9) Tighten four nuts (13) to 20-24 lb-ft (27-33 Nm).
17-120