TM 9-2320-366-20-5
NOTE
Tag connectors and connection points prior
to disconnecting.
(2) Loosen two captive screws (3) and disconnect
connectors L4 (4) and L5 (5) from winch control valve
(2).
(3) Remove nut (6), screw (7), washer (8), terminal lug
TL320 (9), and washer (10) from winch control valve (2).
(4) Remove three nuts (11), screws (12), washers (13), and
winch control valve (2) from right frame rail (14).
(5) Remove four screws (15), washers (16) and two
brackets (17) from winch control valve (2).
17-115
