TM 9-2320-366-20-5
This task covers:
a. Hydraulic Hose Locations
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Crowfoot Attachment, Socket Wrench (Item 11,
Crowfoot Attachment, Socket Wrench (Item 12,
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Pan, Drain (Item 24, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)
Materials/Parts
Adapter Socket Wrench (Item 2, Appendix B)
Dispenser, Pressure Sensitive Adhesive Tape
Adapter Socket Wrench (Item 1, Appendix C)
(Item 20, Appendix D)
Crowfoot Attachment, Socket Wrench (Item 9, Appendix
Cap and Plug Set (Item 14, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Crowfoot Attachment, Socket Wrench (Item 10,
Oil, Lubricating, OE/HDO 10 (Item 42,
Rag, Wiping (Item 50, Appendix D)
a. Hydraulic Hose Locations.
WARNING
Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
Prolonged contact with lubricating oil (MIL-L-2104) may cause a skin rash. Skin and clothing that
come in contact with lubricating oil should be thoroughly washed immediately. Saturated clothing
should be removed immediately. Areas in which lubricating oil is used should be well ventilated
to keep fumes to a minimum. Failure to comply may result in injury to personnel.
CAUTION
Cap or plug hoses and connection points to prevent contamination of 15K SRW hydraulic system.
Failure to comply may result in damage to equipment.
NOTE
Refer to Table 17-5. 15K Self-Recovery Winch (SRW) Hydraulic Hose Locations (All Models Except
Locations for hose locations on the 15K SRW. It may not be necessary to remove all hydraulic hoses
at one time.
Tag hoses and connection points prior to removal.
Remove plastic cable ties as required.
Remove clamps and support brackets as required.
