TM 9-2320-366-20-4
WARNING
Rear tool box weighs approximately 75 lbs
(34 kgs) empty. Attach a suitable lifting
device prior to removal. Failure to comply
may result in injury to personnel or
damage to equipment.
(22) Remove tool box (10) from support structure (44).
b. Disassembly.
NOTE
All tool box lids, stays, and hasps are
disassembled the same way. Left rear shown.
(1) Open tool box lid (1).
NOTE
Step (2) requires the aid of an assistant.
(2) Remove four self-locking nuts (2), washers (3), screws
(4), and stay (5) from tool box (6). Discard self-locking
nuts.
Change 1
16-171
