TM 9-2320-366-20-4
(6) Remove four self-locking nuts (17), lockwashers (18),
and hinges (19) from tool box (6). Discard self-locking
nuts and lockwashers.
NOTE
Left and right stiff leg access panels are
removed the same way. Left side shown.
(7) Remove two self-locking nuts (20), washers (21), screws
(22), and stiff leg access panels (23) from tool box (6).
Discard self-locking nuts.
(8) Remove rubber strips (24) from tool box (6). Discard
rubber strips.
(9) Remove nut (25), two washers (26), screw (27), and
gage bracket (28) from tool box (6).
(10) Remove two grommets (29) from gage bracket (28).
Discard grommets.
(11) Remove two grommets (30) from tool box (6). Discard
grommets.
16-173
