TM 9-2320-366-20-4
16-23. M1089 TOOL BOX REPLACEMENT/REPAIR (CONT)
(9) Disconnect connector 489 (5) from right hand clearance
light connector P89 (18).
(10) Remove nut (19), lockwasher (20), and terminal lug TL20
(21) from tool box (10). Discard lockwasher.
(11) Remove clearance light connector P89 (18) and terminal
lug TL20 (21) from tube (22).
NOTE
All five clearance lights are removed the
same way. One shown.
(12) Remove two screws (23) and cover (24) from clearance
light (16).
(13) Remove four self-locking nuts (25), lockwashers (26),
screws (27), and clearance light (16) from tool box (10).
Discard self-locking nuts and lockwashers.
(14) Perform steps (12) and (13) on remaining clearance
lights.
16-168
