TM 9-2320-366-20-4
NOTE
All four reflectors are removed the same way.
One shown.
Step (15) requires the aid of an assistant.
(15) Remove two self-locking nuts (28), lockwashers (29),
screws (30), and reflector (31) from tool box (10).
Discard self-locking nuts and lockwashers.
(16) Perform step (15) on remaining reflectors.
NOTE
Left and right electrical connector brackets are
removed the same way. Left connector bracket
shown.
Step (17) requires the aid of an assistant.
(17) Remove two self-locking nuts (32), four washers (33),
two screws (34), and electrical connector bracket (35)
from tool box (10). Discard self-locking nuts.
(18) Perform step (17) on right side electrical connector
bracket.
