TM 9-2320-366-20-4
NOTE
Tag electrical
connections
prior
to
disconnecting.
(2) Disconnect connector 489 (5) from left hand clearance
light connector P86 (6).
(3) Remove nut (7), lockwasher (8), and terminal lug TL16
(9) from tool box (10). Discard lockwasher.
(4) Remove clearance light connector P86 (6) and terminal
lug TL16 (9) from tube (11).
NOTE
Three center electrical connectors are
removed the same.
Left hand center
connector shown. Refer to Table 16-1.
M1089 Rear Clearance Marker Light
and connectors on each marker light.
(5) Disconnect connector 489 (5) from left hand center
clearance light connector P54 (12).
(6) Remove nut (13), lockwasher (14), and terminal lugs
TL30 (15) and TL7 (16) from left hand clearance light
(17). Discard lockwasher.
Connectors
LIGHT
TERMINAL
ELECTRICAL
LUGS
CONNECTION
Center
TL7/TL31
P56
Right
TL32
P58
Hand
(7) Remove clearance light connectors P54 (12) and
terminal lug TL7 (16) from tool box (10).
(8) Perform steps (5) through (7) on remaining clearance
lights.
