TM 9-2320-366-20-4
16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT)
ag. M1083/M1084/M1085/M1086 Splash Guard
Removal.
NOTE
Right and left splash guards are removed the
same way. Right side shown.
(1) Remove three self-locking nuts (1), screws (2), brace (3),
and splash guard (4) from bracket (5). Discard self-
locking nuts.
(2) Remove splash guard (4) from brace (3).
(3) Remove two self-locking nuts (6), screws (7), and
bracket (5) from cargo bed (8). Discard self-locking nuts.
ah. M1083/M1084/M1085/M1086 Splash Guard
Installation.
NOTE
Right and left splash guards are installed the
same way. Right side shown.
(1) Position bracket (1) on cargo bed (2) with two screws (3)
and self-locking nuts (4).
(2) Tighten two self-locking nuts (4) to 25-31 lb-ft (34-42
Nm).
(3) Install splash guard (5) in brace (6).
(4) Install splash guard (5) and brace (6) on bracket (1) with
three screws (7) and self-locking nuts (8).
16-116
