TM 9-2320-366-20-4
af. M1090/M1094 Splash Guard Installation.
NOTE
Right and left splash guards are installed the
same way. Right side shown.
(1) Position bracket (1) on dump body (2) with two screws
(3) and self-locking nuts (4).
(2) Tighten two self-locking nuts (4) to 25-31 lb-ft (34-42
Nm).
NOTE
Perform steps (3) and (4) on right side
bracket.
(3) Position screw (5) and self-locking nut (6) in bracket (1).
(4) Tighten self-locking nut (6) to 18-22 lb-ft (24-30 Nm).
(5) Install splash guard (7) in brace (8).
(6) Install splash guard (7) and brace (8) on bracket (1) with
three screws (9) and self-locking nuts (10).
16-115
