TM 9-2320-366-20-4
16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT)
NOTE
Perform steps (12) through (14) on left side.
(12) Position lockwasher (18) and terminal lug TL94 (19) on
front fender (3) with washer (20), screw (21), washer
(22), and self-locking nut (23).
(13) Position three screws (24), six washers (25), and three
self-locking nuts (26) in front fender (3).
(14) Tighten self-locking nut (23) and three self-locking nuts
(26) to 18-22 lb-ft (24-30 Nm).
NOTE
Perform step (15) on right side.
(15) Close cab step tread (27) on cab step (28).
(16) Lower cab (TM 9-2320-366-10-1).
16-112
