TM 9-2320-366-20-4
NOTE
Step (4) requires the aid of an assistant.
(4) Position front fender (3) on cab (7) with 12 washers (8)
and screws (9).
(5) Tighten 12 screws (9) to 18-22 lb-ft (24-30 Nm).
(6) Position three washers (10) and screws (11) in front
fender (3).
(7) Tighten three screws (11) to 18-22 lb-ft (24-30 Nm).
(8) Position three screws (12), six washers (13), and three
self-locking nuts (14) in front fender (3).
(9) Tighten three self-locking nuts (14) to 18-22 lb-ft (24-30
Nm).
NOTE
Perform steps (10) and (11) on right side.
(10) Position four screws (15), eight washers (16), and four
self-locking nuts (17) in front fender (3).
(11) Tighten four self-locking nuts (17) to 18-22 lb-ft (24-30
Nm).
16-111
