TM 9-2320-366-20-4
16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT)
NOTE
Step (2) requires the aid of an assistant.
(2) Install engine splash guard (5) on cab (2) with 14
washers (6) and rivets (7).
(3) Lower cab (TM 9-2320-366-10-1).
ae. M1090/M1094 Splash Guard Removal.
NOTE
Right and left splash guards are removed the
same way. Right side shown.
(1) Remove three self-locking nuts (1), screws (2), brace (3),
and splash guard (4) from bracket (5). Discard self-
locking nuts.
(2) Remove splash guard (4) from brace (3).
NOTE
Perform step (3) on right side bracket.
(3) Remove self-locking nut (6) and screw (7) from bracket
(5). Discard self-locking nut.
(4) Remove two self-locking nuts (8), screws (9), and
bracket (5) from dump body (10). Discard self-locking
nuts.
16-114
