TM 9-2320-366-20-4
This task covers:
a. Right Cab Floor Covering Removal
g. Door Seal Removal (All Models Except M1093/M1094)
b. Right Cab Floor Covering Installation
h. Door Seal Installation (All Models Except
c. Left Cab Floor Covering Removal
M1093/M1094)
d. Left Cab Floor Covering Installation
i. M1093/M1094 Door Seal Removal
e. Center Cab Floor Covering Removal
j. M1093/M1094 Door Seal Installation
f. Center Cab Floor Covering Installation
k. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Tools and Special Tools
Seats removed (For cab floor covering para 16-
Tool Kit, Genl Mech (Item 46, Appendix C)
15).
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 36, Appendix C)
a. Right Cab Floor Covering Removal.
(1) Remove right floor covering (1) from cab floor (2).
(2) Remove four screws (3), washers (4), and molding (5)
from cab floor (2).
b. Right Cab Floor Covering Installation.
(1) Position molding (1) on cab floor (2) with four washers
(3) and screws (4).
(2) Tighten four screws (4) to 22-26 lb-in. (2-3 Nm).
(3) Install right floor covering (5) on cab floor (2).
