TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Windshield washer reservoir and pump removed (for
Nut, Self-Locking (10) (Item 167, Appendix G)
left side) (para 18-2).
Grommet, Nonmetallic (Item 54, Appendix G)
Cab raised (TM 9-2320-366-10-1).
Receptacle (Item 241, Appendix G)
Seal, Nonmetallic (Item 269, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
a. Removal.
NOTE
Left and right cab steps are removed the
same way. Left cab step shown.
(1) Open cab step tread (1) on cab step (2).
(2) Remove four self-locking nuts (3), eight washers (4), and
four screws (5) from cab step (2). Discard self-locking
nuts.
(3) Remove four self-locking nuts (6), eight washers (7), four
screws (8), and cab step (2) from fender (9). Discard
self-locking nuts.
