TM 9-2320-366-20-4
16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT)
(9) Remove 12 spacers (24) from front fender (9).
(10) Remove three self-locking nuts (25), screws (26),
brackets (27) and step (28) from front fender (9).
Discard self-locking nuts.
ab. M1093/M1094 Front Fender Installation.
NOTE
Left and right front fenders are installed the
same way. Left side shown.
(1) Position step (1) and three brackets (2) on front fender
(3) with three screws (4) and self-locking nuts (5).
(2) Tighten three self-locking nuts (5) to 18-22 lb-ft (24-30
Nm).
(3) Install 12 spacers (6) in front fender (3).
16-110
