TM 9-2320-366-20-4
b. Disassembly.
NOTE
Left and right sides of rear stabilizer bar are
disassembled the same way. Right side
shown.
(1) Remove self-locking nut (1), bolt (2), and bracket (3)
from stabilizer bar (4). Discard self-locking nut.
(2) Remove two washers (5), spacer (6), bushing (7), and
two pins (8) from bracket (3).
(3) Remove four self-locking nuts (9), bolts (10), and two
clamps (11) from rear stabilizer bar (4). Discard self-
locking nuts.
(4) Remove four self-locking nuts (12), bolts (13), and
brackets (14 and 15) from rear stabilizer bar (4). Discard
self-locking nuts.
(5) Remove resilient mount (16) from rear stabilizer bar (4).
(6) Perform steps (1) through (5) on left side of rear
stabilizer bar.
Change 1
