TM 9-2320-366-20-4
15-4. REAR AXLE SHOCK ABSORBER REPLACEMENT (CONT)
(3) Extend or compress rear axle shock absorber (1) length
to align with holes in upper bracket (2).
NOTE
Perform steps (4) and (5) on vehicle serial
numbers 1399 through 2987.
(4) Position rear axle shock absorber (1) in upper bracket
(2) with three washers (7), bolt (8), and self-locking nut
(9).
(5) Tighten self-locking nut (9) to 195-239 lb-ft (264-324
Nm).
NOTE
Perform steps (6) and (7) on vehicle serial
numbers 0001 through 1398, and 2988 and
higher serial numbers.
(6) Position rear axle shock absorber (1) in upper bracket
(2) with washer (10), bolt (8), and self-locking nut (9).
(7) Tighten self-locking nut (9) to 195-239 lb-ft (264-324
Nm).
End of Task.
15-8
