TM 9-2320-366-20-4
NOTE
Perform step (2) on vehicle serial numbers
1399 through 2987.
(2) Remove self-locking nut (1), bolt (2), and three washers
(5) from rear axle shock absorber (4). Discard self-
locking nut.
(3) Remove self-locking nut (6), bolt (7) and washer (8) from
rear axle shock absorber (4). Discard self-locking nut.
(4) Remove rear axle shock absorber (4) from upper bracket
(9) and lower bracket (10).
b. Installation.
NOTE
Left and right side rear axle shock absorbers
are installed the same way. Right side
shown.
(1) Position rear axle shock absorber (1) in upper bracket
(2) and lower bracket (3).
(2) Position rear axle shock absorber (1) on lower bracket
(3) with washer (4), bolt (5), and self-locking nut (6).
