TM 9-2320-366-20-4
(4) Position two clamps (7) on rear stabilizer bar (2) with
four bolts (8) and self-locking nuts (9).
(5) Position bushing (10), spacer (11), and two washers (12)
in bracket assembly (13).
(6) Install two pins (14) in washers (12) until flush.
(7) Position bracket assembly (13) in bracket (3) with bolt
(15) and self-locking nut (16).
(8) Perform steps (1) through (7) on left side of rear
stabilizer bar.
e. Installation.
NOTE
Left and right sides of rear stabilizer bar are
connected the same way. Right side shown.
WARNING
Rear stabilizer bar weighs approximately
50 lbs (22 kgs). Attach a suitable lifting
device prior to installation. Failure to
comply may result in injury to personnel
or damage to equipment.
NOTE
Step (1) requires the aid of an assistant.
(1) Position rear stabilizer bar (1) under vehicle and support
with trestles.
Change 1
15-13
