TM 9-2320-366-20-4
15-5. REAR STABILIZER BAR REPLACEMENT/REPAIR (CONT)
(2) Position rear stabilizer bar (1) in axle bracket (2) with
bolt (3) and self-locking nut (4).
NOTE
Bracket assembly may require adjustment to
align with frame bracket.
(3) Position bracket assembly (5) on frame bracket (6) with
bolt (7) and self-locking nut (8).
(4) Tighten four self-locking nuts (9) on clamps (10) to 43-52
lb-ft (58-71 Nm).
(5) Tighten self-locking nut (8) on bracket assembly (5) to
75-89 lb-ft (101-121 Nm).
(6) Tighten four self-locking nuts (11) on bracket (12) to 21-
26 lb-ft (28-35 Nm).
(7) Tighten self-locking nut (13) on bracket (12) to 399-487
lb-ft (541-660 Nm).
15-14
Change 1
