TM 9-2320-366-20-4
h. Front Leaf Spring Resilient Mount Installation
(1) Install C-Clamp on leaf spring (1).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
NOTE
If vehicle has resilient mounts attached with
screws and washers, notify DS to install four
kits P/N 57K2003 on vehicle.
(2) Apply sealing compound to threads of bolt (2).
(3) Position spacer (3) and resilient mount (4)
on bolt (2).
(4) Tighten resilient mount (4) 1 urns after
t
contact with plate (5)
(5) Remove C-Clamp from leaf spring (1).
i. Follow-On Maintenance.
Lower cab (for front angle bracket resilient
mount) (TM 9-2320-366-10-1).
End of Task.
Change 2
